How To Remove Central Vacuum From Wall? 5 Steps Only

A house’s central vacuum system increases the house’s value in the 90s. It’s easier to clean the house with a vacuum built into the walls, saves money, and requires less clean-up than a standard vacuum. In addition, some homeowners don’t care for outdated units. What is the best way to remove it?

In this article, I will walk you through the steps on how to remove central vacuum from wall. Also, provide some tips on safely disposing of the vacuum cleaner once it’s been removed from the wall. 

What to Know Before Removing a Central Vacuum System

Central vacuum systems come with a lot of parts and components, so it’s important to be familiar with what’s included to maintain, operate, and remove the system properly.

You can remove only visible parts of your central vacuum if you want to get rid of it. Taking out all hidden parts is not necessary. It will labor and cost more to remove the unit correctly. You don’t notice hidden parts, so keep them the way they are. It also gives you opportunities to reinstall your favorite central vacuum model later.

How To Remove Central Vacuum From Wall

Disconnect the central vacuum system

First, turn off the central vacuum system by flipping the breaker box to the OFF position. This will remove power from all of the vacuum’s components in one go.

Ensure no electricity is running to any electrical unit before handling it to avoid being electrocuted. If you work on the core unit and wall inlets separately, you can flip the breaker for each. 

Take down central vacuum power unit

You will have to remove the unit according to the brand and location of the core. Next, you will likely need to unbolt it from the wall, cut the wiring, and lift it from the wall. Afterward, you can remove any remaining mounting equipment.

Once you’ve removed the core unit from your wall, remove any attachments that are connected to it (hoses, valves, filters, etc.). Dispose of these materials responsibly – don’t leave them lying around where children can access them.

Identify and remove visible pipes

When the central vacuum power unit is off the wall, you can identify and remove any visible pipes. There is no need to remove the pipes that run from the core unit to the inlets. Leaving them inside the walls will not harm them since there will be no connections for them. Removing all the pipes inside the house will require you to cut the walls, which is unnecessary and laborious.

If you see any piping running out of the wall into the room, it is best to cut away these pipes and then patch the holes with plaster. Once all pipes and attachments have been removed from the wall, clean up any work area debris.

Removing the wall inlet

Central vacuum systems will no longer work once the core is removed. Removing wall inlets that are hidden, smaller, or do not bother you is unnecessary. If you want to sell your home and allow the future buyer to reinstate the vacuum, it can be beneficial to leave them.

If you still wall to remove the wall inlet, follow these steps:

• Remove the wall plate from the wall using a screwdriver.
• Loosen two screws at the top and bottom of the plate to release it from the wall.
• After the wire is unattached, the voltage wire will no longer have power so you can disconnect it.
• Paint over the patches after covering the inlet holes with drywall and plaster. In the end, no trace of the central vacuum system will be left.

Note: When removing the wall outlets, remove the core unit first since the voltage comes from there. 

Related post: How to fix central vacuum wall inlet?

How to remove central vacuum dustpan from wall

It depends on the design of the vacuum cleaner and the type of pan that is fitted. However, most vacuum cleaners come with a removable dustbin, so you can usually remove it by unscrewing the bottom or top of the dustbin and pulling it out.

To remove the dustpan from the wall, follow these steps:

• There are two screws on each side of the dustpan.
• Remove them with a screwdriver.
• Once they’re removed, you can lift out the dustpan.
• Cover the holes with plaster.
• Clean the area where it was located.
• Paint over the plaster.

When Should I Remove My Central Vacuum?

There are a number of reasons why you might want to consider removing your central vacuum. Here are some of the most common reasons:

1. You may be unhappy with the performance of your central vacuum. If it isn’t producing enough suction power for cleaning dust and debris, it might be time to make a change.
2. You may want to upgrade to a more efficient central vacuum system. Many options are available on the market today, so choosing the one that will meet your needs is important.
3. Your central vacuum system might not be compatible with your home or lifestyle. If you’re looking to replace your central vacuum, make sure you choose one that will work well with your existing setup.
4. You might not be using it as much as you think. A central vacuum cleaner can be a great asset in a home if it’s used regularly. But it may not be worth the investment if it’s not used often.
5. If your central vacuum is more than 20 years old, it might be time to consider replacing them. Central vacuum systems have been redesigned and improved over the years, so older models may not be as efficient as newer ones.

Final Thoughts

I hope this how to remove central vacuum from wall guide help you understand the whole process. As you can see, removing central vacuum cleaner is not rocket science. Once you have assessed your situation and started the right steps, getting rid of it safely should not take more than a couple of hours.

Ensure all the tools and materials are safe before starting to work on it. And also make sure not to touch any sharp surfaces while working so that nothing goes wrong. Also, ensure to read all instructions carefully before going ahead and removing the central vac on your own. Ask a professional technician or the customer support hotline for assistance if in doubt.

How to Remove central vacuum System FAQs