If you’re like most people, you probably don’t think much about your beam central vacuum filter. After all, it’s just a small cloth bag that sits below your vacuum cleaner and captures dust, dirt, and other small particles.
If your filter isn’t properly cleaned, that could lead to major problems. So how to clean beam central vacuum filter? Read on to find out!
How to Clean Beam Central Vacuum Filter
Cleaning your central vacuum filter is important to maintaining your vacuum cleaner. Not only will it improve the performance of your vacuum cleaner, but it will also extend the life of your filter.
Here are 7 tips for cleaning your central vacuum system filter:
- With a twist or unlatch, remove the unit’s base.
- After removing the bucket, place a plastic bag over the spot where the bucket was and hold it tight around the diameter of the tank.
- Shake the plastic bag vigorously through the center-weighted cloth filter.
- Pull firmly directly inward on the center-weighted filter to remove it. When the stiff-out rim flexes in, the filter will fall out.
- Replace this filter with a new one.
- Clean the filter with a vacuum cleaner hose or brush.
- There is no need to wash this filter as debris gets trapped between the layers.
Note: You can only clean Washable Filters or Permanent Filters. Never try it on Disposable Filters.
What Are Some Signs of a Dirty Beam Central Vacuum Filter?
A few things indicate that your central vacuum cleaner needs to be cleaned. One of the most common signs is that the filter appears to be covered in dust and debris.
If the filter is not clean, it can cause poor suction and decreased performance. Other signs that your central vacuum system might need to be cleaned include:
- The air filter is dirty – The air filter traps dirt and dust before it can reach the motor, which can cause decreased suction and decreased performance.
- The vacuum cleaner makes strange noise – If the vacuum cleaner is making a strange noise, it might be because there’s something blocking the suction. This could be the result of a dirty filter.
- The vacuum cleaner doesn’t seem to be picking up as much dirt and dust – If your central vacuum cleaner is not picking up as much dirt and dust as it used to, it may be because the filter is clogged.
How to Maintain Your Beam Central Vacuum Filter
1. Regularly clean the filter
Cleaning the filter regularly will ensure that your central vacuum system remains in good condition and operates at its best.
2. Check for debris
Be sure to check the filtration and crevices of your central vacuum cleaner for any dirt, dust, or debris buildup. This can lead to decreased performance and increased wear on internal components.
3. Check for clogs
If you notice any clogs or build-up in the filters, be sure to take action before it causes major problems with suction or mobility.
4. Check for suction
Be sure to check your central vacuum cleaner’s suction levels using a tool like an air pressure gauge. If the levels are low, it might be time to clean or replace the filter.
5. Check for noise
If the vacuum cleaner makes strange noises, it might be due to a clogged or dirty filter. In this case, you’ll need to take action before it causes major damage.
6. Check for maintenance
Be sure to regularly check the condition of your central vacuum cleaner’s parts for wear and tear. This will help you maintain optimal performance and ensure that your vacuum cleaner lasts long into the future.
Can You Wash a Beam Central Vacuum Filter?
No, you cannot wash a HEPA Beam Central Vacuum Filter. This is designed to be replaced rather than washed.
So replaced when it starts to show signs of wear and tear or when it becomes clogged. But you can use a shop vac hose or soft brush accessories to clean it.
How to Change a Beam Central Vacuum Filter
Final Thoughts
Regular cleaning of your Beam central vacuum filter will help to ensure that your vacuum cleaner operates at its best and lasts longer. Now you know how to clean beam central vacuum filter.
I hope you find this article helpful. If you have any questions about this topic, please feel free to ask in the comments below or on Facebook. And if you found this article helpful and would like to see more like it, please share it with your friends!
Related Post:
How to clean electrolux central vacuum filter
How to clean kenmore vacuum hepa filter
How to clean nutone central vacuum filter
How to clean hoover central vacuum filter
Brian Bennett is an experienced central vacuum expert who has written extensively on the topic. His articles cover a variety of topics related to central vacuum systems, including installation, maintenance, and troubleshooting. Brian also offers a variety of helpful tips and tricks for optimizing central vacuum performance.